In stock
Standard Elbow machine designed to produce square and round elbows from the seamless or welded ducts.Standard downspout machine size range (standard set of dies): rectangle 2x3 3x4, round 2 in. 3 in. 4in.Materials: machine operates with pipes made of..
Ex Tax:
$ 11 500
$ 11 500
In stock
MEL - Manual goffering downspout machine designed to produce square and round elbows from the seamless or welded ducts.Standard machine size range (standard set of dies): rectangle 2x3 3x4, round 2 in. 3 in. Materials: machine operates with pipe..
Ex Tax:
$ 5 200
$ 5 200
In stock
5”-6” Half Round Gutter Downspout Machine from Stangroup.usHalf Round Gutter series has a variety of configurations:Half round single bead 5”Half round Single Bead 6”Half round single bead Combo 5/6”Half round Double Bead 5”Half Round Doubl Bead 6”Ha..
Ex Tax:
$ 0
$ 0
In stock
Max coil: weight 2000lbs, width 27", ID 18"Manual Decoiler D200 made to hold a coil of material and spin it to unwind sheet materials from the coil.Maximum weight of the coil 2000 lbs. Maximum coil width up to 27 inches.Decoiler can be used to uncoil..
Ex Tax:
$ 1 600
$ 1 600
In stock
Dimensions:Length : 30" Height - 50"Width : 30" Weight - 90#Features:Bottom cradle handles any size rollEasy on and off of bottom coilHas wheels for easy portability around warehouseAdjustable guide handles different widths of coilFeet and inches cou..
Ex Tax:
$ 1 430
$ 1 430
In stock
Gutter Hood Custom roll-formerEveryone is concerned about leaf and debris protection. The most popular surface tension systems come at a huge premium, with many joints . Why not make your own gutter good in custom lengths with your own machine ..
Ex Tax:
$ 0
$ 0
Out Of Stock
Industrial automatic elbow machine designed to produce square and round downspout and HVAC elbows with seamed and welded ducts.Standard machine size range: rectangle 2x3 to 6x6, round 3" to 8"Materials: machine operates with pipes made of aluminum, c..
Ex Tax:
$ 0
$ 0
Pre-Order
Commercial and Portable Downspout & Elbow Machines - starting at 34.500$Pipe Size: 2”x 3”; 3” x 3”; 3”x 4”•3” Round •4” Round • CUSTOM(Each machine does one size and configuration)Speed:•Standard 30 ft./min.•Optional 45 or 60 ft./min. (alum..
Ex Tax:
$ 0
$ 0
Pre-Order
Max coil: weight 5000lbs, width 19", ID range 14.5" to 20"Manual Decoiler DC500 designed to hold and hold and spin coils of material of a coil.Maximum weight of the coil is up to 5000 lbs. Maximum coil width up to 19 inches.Decoiler can be used to un..
Ex Tax:
$ 0
$ 0
Pre-Order
Gorelocker SGWT-1250 designed to produce round duct elbow, fabricated fittings and fittings production. This machine is a cost-effective solution for the production of welded elbows, reducers, end caps and off-sets for HVAC, downspout and exhausting ..
Ex Tax:
$ 0
$ 0
