Cart 0
Compare 0 Wishlist 0
My Account
Menu
Our address: Main Buildings at 102 E. Railroad Ave., Knoxville, PA 16928
Main Buildings at 102 E. Railroad Ave., Knoxville, PA 16928
Phones: +15704046968

HVAC-Square-Duct-work-Machinery

Pittsburgh Lock Forming Machine
0
In stock
Pittsburgh lock-forming machine designed to make 6 types of heavy gauge locks 18 - 24 Gauge low carbon steel. Pittsburgh lock. Standing Seam lock. Single Hem L. Double Hem Z. Standing seam Locking pin C. Radial single hem L.Machine designed for indus..
Ex Tax: $ 2 900
$ 2 900
Pittsburgh Lock Seamer
0
In stock
Pittsburgh Lock Seamer can cut your finishing time up to 90%. It can be used to fold over or "seam" metal 24 to 20 gauge (FS2420) and or 20 to 18 gauge (FS2018) on general fabricating, run Pittsburgh Lock Seams on ductwork, tubes, doors, panels, etc...
Ex Tax: $ 0
$ 0
Pittsburgh Lock Seamer
0
In stock
Pittsburgh Lock Seamer can cut your finishing time up to 90%. It can be used to fold over or "seam" metal to 20 gauge and lighter on general fabricating, run Pittsburgh Lock Seams on ductwork, tubes, doors, panels, etc. Operators require no special t..
Ex Tax: $ 900
$ 900
Pneumatic_TDFC_Corner_Fixing_Machine
0
In stock
TDC TDF duct connection system is intended to place TDFC corners into duct sections and crimp them permanently. This is a pneumatic machine operating without almost any human interference. The operator is expected to press the needed buttons and peda..
Ex Tax: $ 5 500
$ 5 500
S-cleat C-drive locking pin Pittsburgh and Seam Lock Forming Machine
0
In stock
The lock seam machine as well as Roll-forming speed, feet per min 36* 8 pairs in 3 row 18-24 ga / 0,5-1,2mm 2,2 kWt / 3 Hp  220-240v / 60Hz/ 3 phase. Size LхWхH Pittsburgh lock. It consists of a couple of profiles cr..
Ex Tax: $ 4 750
$ 4 750
TDF Lock & Cleats Former
0
In stock
TDF machine and TDC flange forming machine are required for any metal industries. But as far as mostly the transverse duct flanges are used nowadays, it is much better to buy a TDF former. The advanced models can build up a high roll-forming speed be..
Ex Tax: $ 9 700
$ 9 700
TDF_Air_Brake
0
In stock
Pneumatic TDF&C Air Brake designed for bending 0 - 120 degree bends for HVAC rectangular duct work. It is a very simple and fast machine to bend straight duct joints and fittings with TDC & TDF type flange connectors. One op..
Ex Tax: $ 6 970
$ 6 970
5' Motorized Double Decoiler
0
In stock
Motorized unit. Max coil: weight 10.000lbs, width 60", ID 24"5' Motorized Decoiler made to hold and spin coiled materials as metal, plastic, paper or else rols.Maximum weight of the coil is up to 10000 lbs. Maximum width of the coil is 60 inches.Self..
Ex Tax: $ 6 900
$ 6 900
Round & square elbow machine
0
Out Of Stock
Industrial automatic elbow machine designed to produce square and round downspout and HVAC elbows with seamed and welded ducts.Standard machine size range: rectangle 2x3 to 6x6, round 3" to 8"Materials: machine operates with pipes made of aluminum, c..
Ex Tax: $ 0
$ 0
Downspout Machines
0
Pre-Order
Commercial and Portable Downspout & Elbow Machines - starting at 34.500$Pipe Size:  2”x 3”; 3” x 3”; 3”x 4”•3” Round •4” Round • CUSTOM(Each machine does one size and configuration)Speed:•Standard 30 ft./min.•Optional 45 or 60 ft./min. (alum..
Ex Tax: $ 0
$ 0
HVAC-Square-Duct-work-Machinery
HVAC Square Duct-work Machinery as: Automatic duct lines designed to produce rectangular ducts automatically. TDF & TDC flange roll former, Pittsburgh lock, Standing seam, Hemming flange, S & C cleat rollformers.  TDFC folders, TDF&C Corner  fitters, Pittsburgh seam closing tools,  lock former, shear and guillotine, etc,