• +1 570 404 6968 (Whatsupp & WeChat)

Double Standing seam roof panel rollforming machine SS4E-15

Portable Standing seam roof panel roll-forming machine SS4E-15 for 1" or 1.5" double standing seam profiles.

• Length: 5' 4" (1.6m)
• Width: 3' 5" (1.1m)
• Height: 1' 9" (0.5m)
• Weight 1000 lbs. (455 kg)
• Speed: 30 ft/min (9m/min) Approx.
• Drive: Polyurethane and lower steel forming Rollers
• Shear: Manually Powered, Entrance end slitter
• Coil Width: 15” to 28" (380mm to 711mm)
• Materials Formed
• Steel 30 gauge to 24 gauge (.3mm to .6mm)
• (painted, galvanized, aluminized)
• Aluminum .019" to .032" (.5mm to 08mm)
• Copper 16 oz. to 20 oz. 3/4 Hard
• (.5mm to .7mm)

• Polyurethane and Bottom Forming Drive Rollers
• Hard Chrome Steel Forming Roller System
• Easy to operate Entrance End Manual slitter cutoff
• Portable Dongle for Ease of Operation
• Width Adjusted with simple crank
• Wireless Remote Control
• Length Control with Limit Switch
• Clip Relief Roller Set included
• Two Sets of Bead Rollers included
• 1.5 HP Electric Motor
• Welded Tubular Steel Frame
• One Year Limited Parts Warranty


Exit shear $ 4875

ROS-10 Run Out Table $285 ea.



Table attaches to shear and is used to support panel as it exits the machine. Adjustable leg allows variation in height from 25” to 43”. Available in connectable 10 ft. sections.

EXA Expandable Arbor $1750 ea.

Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used remotely with Free Standing De-Coiler.

FSDC Free Standing De-Coiler stand $850

A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. (Picture shows optional EXA) This can also be mounted on machine for overhead reel holder.

RER Reverse Entrance Rollers $650

Bolt on entrance roller needed when FSDC above is mounted on the SS4E to reverse the coil at entrance end.

WHSD Warehouse Stand with Rollers $950

Easy to mount SS4E for warehouse use with rollers for mobility.

D200 Console Single Stand De-Coiler

A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Max capacity 1,500 lbs. No need to take of the reel to set on a coil.

OFDC On-floor decoiler

very mobile and helpful device to hold coil for operation and storage. Capacity 800lbs.

EXTRA ROLLER SYSTEMS: Forming rollers used to form various panel profiles.

SS100 1” Mechanical Seam $4500

SS150 1.5” Mechanical Seam $4500

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
  • Product Code: Standing seam roof panel rollforming machine SS4E-15
  • Availability: 2 - 3 Days
  • $14 950

write to Whatsapp

Related Products



R panel  Roll-Forming Rooffing machine SS4E - PRO . Roof panel machine from manufacturer.It fea..

$30 500 Ex Tax: $30 500

Standing seam curving machine

Standing seam curving machine

Standing seam roof panel curving machine was developed by our campaign specialistsDesigned for conсa..

$0 Ex Tax: $0

Industrial Gang Metal Slitter

Industrial Gang Metal Slitter

Industrial 55" wide sheet metal slitter. Goes with set of five pairs of slitting blades. Shaft..

$5 800 Ex Tax: $5 800



Industrial Sheet metal perforation machine  made to perforate AG panels, soffit, siding, C chan..

$11 700 Ex Tax: $11 700

Tags: Mobile roof panel roll forming machines, custom design, Double Standing seam, roof panel rollforming machine, SS4E-15, roof panel machine, roof panel rollformer, standing seam panel machine, snap lock machine, snap lock rollforming, SSR, SSJ, NTM roof machine, wuko, zimpelcam,