• +1 570 404 6968 (Whatsupp & WeChat)

TDF TDC Lock & Cleats roll-former

This machine provides alternative method of buying expensive knock on flange. (To make a piece of duct in old way you have to take the flange off the shelf, cut four pc, deburr it, fit it with thick expensive corners, place on the end of the raw edge, and either tech screw or spot-weld and seal.) Using TDF you just need to notch your sheet, roll-form the flange, bend up the duct and clip in four regular corners (Automatic corner fixing machine). The TDF method will save you approximately $40 per joint.  Eliminates the necessity to stock knock on flange, it saves your cash flow as well as labor savings. Any serious Duct Manufacturer can not afford to not use either TDC or TDF. You'll be amazed at the savings your business can make with this machine. Warranty two years.


Ask Specials for 2018 #AHRExpo https://ahrexpo.com/

Technical parameters:
Roll-forming speed, feet per min 45*
Quantity of the forming roller pairs 2 x 14
18-24 gauge for TDC
22 gauge for Clip
Main motor power 5 Hp / 220-240v / 60Hz/ 3 phase.
Size LхWхH 130х40х56 " 3300х1000х1430 mm
weight 2100 lbs / 950kg

Fits to most of US TDF corners:


Write a review

Note: HTML is not translated!
    Bad           Good
  • Product Code: TDF TDC lockformer
  • Availability: In Stock
  • $11 950

Related Products



Pneumatic TDF&C Brake designed for bending 0 - 120 degree bends for HVAC rectangular duct work. ..

$6 900 Ex Tax: $6 900



It is pneumatically operated machine that inserts specific style TDC/F corners into the ends of asse..

$7 700 Ex Tax: $7 700

Tags: TDF TDC Lock & Cleats roll-former, TDF lockformer, TDF cleaps, used TDF machine, used lockformer, lockformer on sale, TDC forming, TDC machine, TDC used lockformer, TDC lockformer,