Cart 0
Compare 0 Wishlist 0
My Account
PRODUCT CATALOG
Our address: Main Buildings at 102 E. Railroad Ave., Knoxville, PA 16928
Main Buildings at 102 E. Railroad Ave., Knoxville, PA 16928
Phones: +15704046968
Go to contacts
+1 570 404 6968
$ 49 500

Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer

Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Industrial 4–6 inch Metal Seamless Siding Machine with J-channel Rollformer
Product Code: 4-6 Siding and J-channel Rollformer
In Stock
$ 49 500
Ex Tax: $ 49 500
Ask a Question
Ask a Question on WhatsApp

4–6 inch Metal Seamless Siding Machine with J-channel Rollformer

The 46J metal siding roll forming machine shapes continuous metal sheets or coils into 4" or 6" horizontal wall siding profiles, and J-channel to fit siding panels. J-channel and siding profiles come with mounting slots. 4" and 6" wide siding profiles are formed with the same set of rollers that can be adjusted manually using spacers. J-channel profiles are formed on separate rollers on the right side of the main shaft and do not require adjustments.

The machine passes the flat metal strip through a series of tooling forming rollers that progressively bend the metal into the wall siding shape, creating long, uniform, and consistent panels. It is equipped with a hydraulic shear that does not require adjustment. Panel length and batch quantity are controlled with a PLC. A wireless remote assists with starting, feeding, and adjustment. These machines are efficient for producing a high volume of uniform panels.

How it works:

  • A metal roll or coil is set on the decoiler located on top of the machine and fed around the front reverse rollers.
  • It passes through a series of tooling forming rollers.
  • The PLC-automated hydraulic cutting system then cuts the formed panels to the required length.

Machine can be adjusted to run PPGI / GI (26-24 gauge, grade 50-60) or Aluminum (.024-.032). It is a portable machine measuring just 13' long, 3' wide, and 4' tall.

Weight: 4000 lbs

Power requirements: 210-240v single phase, 3 kW hydraulic pump motor, and 4 kW main drive motor.

Tags: 6" wall siding, 4" steel siding machine, horizontal siding machine, J channel roll former, portable metal siding making machine, custom siding rollformingmachine

Reviews
0/ 5
average product rating
0
0
0
0
0
There are no reviews for this product. Be the first to leave your review.