0
In stock
Industrial automatic elbow machine designed to produce square and round downspout and HVAC elbows with seamed and welded ducts.Standard machine size range: rectangle 4x5, round 6" to 8"Materials: machine operates with pipes made of aluminum, co..
Ex Tax:
$ 0
$ 0
0
In stock
1/2" or 3/8" Pittsburgh (optional) lock-forming machine designed to make 6 types of heavy gauge locks 22 - 26 Gauge low carbon steel. Pittsburgh lock. Standing Seam lock. Single Hem L. Double Hem Z. Standing seam Locking pin C. Radial single hem L.Ma..
Ex Tax:
$ 2 900
$ 2 900
0
In stock
Pittsburgh Lock Seamer can cut your finishing time up to 90%. It can be used to fold over or "seam" metal 24 to 20 gauge (FS2420) and or 20 to 18 gauge (FS2018) on general fabricating, run Pittsburgh Lock Seams on ductwork, tubes, doors, panels, etc...
Ex Tax:
$ 0
$ 0
0
In stock
Pittsburgh Lock Seamer can cut your finishing time up to 90%. It can be used to fold over or "seam" metal to 20 gauge and lighter on general fabricating, run Pittsburgh Lock Seams on ductwork, tubes, doors, panels, etc. Operators require no special t..
Ex Tax:
$ 800
$ 800
0
In stock
Used with Transverse Duct Connection is a connection system for rectangular ductwork that is formed directly onto the ductwork T.D.C. and Transverse Duct Flange T.D.F. duct connection system is intended to place corners into preformed duct flanges an..
Ex Tax:
$ 5 800
$ 5 800
0
In stock
The lock seam machine as well as Roll-forming speed, feet per min 36* 8 pairs in 3 row 18-24 ga / 0,5-1,2mm 220v (Optional: 2,2 kWt / 3 Hp 220-240v / 60Hz/ 3 phase). Size LхWхH Pittsburgh lock. It consists of a coupl..
Ex Tax:
$ 4 550
$ 4 550
0
In stock
Pneumatic Air Brake designed for bending 0 - 120 degree bends for HVAC rectangular ductwork with integrated or preformed flange. It is a very simple and fast machine to bend straight duct joints and fittings. One operator can easily..
Ex Tax:
$ 6 970
$ 6 970
0
In stock
TDFC flange forming machine designed for HVAC industry. Integrated flange roll formed with this machine would accommodate corners made for standard T.D.C.® and T.D.F.®
transverse duct connector or transverse duct flanges as: Cornermatic, VDCI..
Ex Tax:
$ 10 700
$ 10 700
0
In stock
Industrial 60" wide metal beading machine.
Goes with set of five pairs of beading rollers.
Shaft diameter 3.35", both top and bottom shafts have bearing support for heavy gauge metal and perforation stability.
Capacity - 18 - 26 gauge (may v..
Ex Tax:
$ 6 800
$ 6 800
0
In stock
Commercial and Portable Downspout & Elbow Machines - starting at 34.500$Pipe Size: 2”x 3”; 3” x 3”; 3”x 4” ,4"x4", 4"x5".•3” Round •4” Round • CUSTOM Sizes(Each machine does one size and configuration)Speed:•Standard 30 ft./min.•Optional 45..
Ex Tax:
$ 0
$ 0
0
In stock
The
Standing S Cleat machine has 12 forming stations to form sheet metal
into a standing S cleat, the standing S cleat is a roll shape that
combines a conventional S cleat with a standing seam for greater strength
and rigidity. High precision..
Ex Tax:
$ 0
$ 0
0
In stock
Motorized unit. Max coil: weight 10.000lbs, width 60", ID 24"5' Motorized Decoiler made to hold and spin coiled materials as metal, plastic, paper or else rols.Maximum weight of the coil is up to 10000 lbs. Maximum width of the coil is 60 inches.Self..
Ex Tax:
$ 6 300
$ 6 300
HVAC Square Duct-work
Machinery as: Automatic duct lines designed to produce rectangular ducts
automatically. T.D.F. & T.D.C. flange roll former, Pittsburgh lock,
Standing seam, Hemming flange, S & C cleat rollformers. TDFC
folders, T.D.F.&C. Corner fitters, Pittsburgh seam closing tools, lock
former, shear and guillotine, etc,
FAQ | HVAC Square Duct-work Machinery
-
What are the most popular machines in this category?