Your shopping cart is empty!
Model D60 is a manual metal spinning lathe.
This lathe is designed for manual spinning. Strong and heavy base frame made of cast iron. Machine has a powerful 5kWt motor drive with two speed double belt gear. Max blank diameter up to 60 inches (4 feet and 12" or 1.5m). Special design of the back tail allows fast installation of the blank and removal of the finished item from the mold. On this lathe you can spoon any kind of metal: aluminum, brass, copper, silver, steel, stainless steel and spoon up to 13 Gauge steel (max thickness up to 0.1 inch or 2.5mm for the low carbon steel). It's possible to use simple and crank spinning tools depending on blank strength or personal preferences. Standard warranty two years.
Main tech parameters:
Max blank diameter up to 60 inches (4 feet 12" / 1530mm)
Blank material - aluminum, brass, copper, silver, steel, stainless steel.
Max blank thickness up to 0.1 inch or 2.5mm for the low carbon steel (13 Gauge).
Main motor power 7.5 kWt.
Weight of the machine - 3300 lbs / 1500kg.
Bearing type: 6319 & 30319 front, 32318 back.
Machine size: 90" x 27" x 56"
Two Speed 2100* / 3500* rpm
Main shaft thread 2.25" x 8 right
Example of the simple and cranked tools:
0 reviews / Write a review
Tags: metal spinning,
manual metal spinning,
used metal spinning,
metal spinning lathe,