Your shopping cart is empty!
Gorelocker SGWT-1250 designed to produce round duct elbow, fabricated fittings and fittings producti..
Industrial elbow machine designed to produce square and round downspout and HVAC elbows with seamed ..
Gorelocker SGWT-100 designed to produce round duct elbow, fabricated fittings and fittings production. This machine is cost-effective solution to the production of welded elbows, reducers, end caps and off-sets for HVAC, downspout and exhausting structures. Low power consumption, easy-to-operate and adjust SGW-100 provides you the power to fabricate hundred of fittings in-store per day. It's a two side machine with two separately working sites. One side is a Flanger/Swagger to flange one side of a cylindrical gore. On the same side by switching mode crank - upper table goes dawn and operator is swagging the connecting side of the next gore. On the second side (opposite end) of the machine (lockseamer side), at the same time enother operator finalizes the operation by closing the seam into a standing rib. This way two operations are conducted simultaneously, increasing final productivity. Standing rib diameters from 4 to 400 inches (100 - 1000mm). Final seals eliminates the need for painting, coating or sealant. Gorelocker SGWT-100 uses minimal power - only 2.2kWt for each side (max 4.4kWt while two operators working simultaneously). Required floor space is only 8.5 x 3 feet. This model doesn't have hydraulic station and functions without shavings, heat, noise, water or spark production.