• +1 570 404 6968 (Whatsupp & WeChat)

Manual Decoiler D200

Manual Decoiler D200 designed to hold and decoil sheet materials from the coils.

Maximum weight of the coil is up to 3300 lbs (1500kg).

Maximum coil width up to 27 inches / 670mm.

Decoiler can be used to uncoil metal, plastic, paper and other materials.

Self Centering coil holder is easy to install and fix inside of the metal coil.


Optional modification:

Extensions increasing ID - OD range;

Installation of the motor, gear box, belt drive and automatic start/stop function with limit switch.



Operation way:

To install the coil with material on the decoiler you must do as follow:

1. Use hand wrench to shrink the reel few inches less than your coil inside diameter ID

2. Set the coil on the reel

3. Expand self centering coil reel with a hand wrench, to fix coil on the reel;

4. Set limiters on the reel paws 

5. Adjust brake


Once you pull out age of the material from the coil - coil starts spinning. For convenient operation and safety decoiler equipped with a friction brake, expanding wrench, and limiters for the reel paws.

Safety requirements: maximum weight for the full width coil is 1500lb.

 

Technical parameters
Range of the Inside coil diameter

13 - 18 inches / 330 - 460 mm

Maximum coil weight 3 300 lb / 1500 kg
Maximum coil width 26.5 inches / 670 mm
Size, LхWхH* 24x34x42 inches / 610х860х1070mm
Weight* 440 lbs / 200 kg

Write a review

Note: HTML is not translated!
    Bad           Good
  • Product Code: D200
  • Availability: Pre-Order

Tags: metal decoiler, uncoiler, de coiler, coil reel, metal coil reel, metal coil decoiler, metal coil decoiler, metal decoiler, uncoiler, de coiler, coil reel, metal coil reel, metal coil decoiler, metal coil decoiler, downspout decoiler, gutter machine decoiler, roof panel machine decoiler,